GLASS

All our glass pieces are indiviual.  They are not mass produced so once you have bought one, no other that is shown will ever be exactly the same! 

These Glass pieces can be set in Art Clay 650 or PMC3 and fired in a kiln without affecting the glass piece.  Alternatively why not try painting a design on each piece with Art Clay Overlay paste!

Click here to edit description
!

GLASS LEAVES SET

!

This beautiful glass set has been indivually hand cut to enable you to create unique designs with PMC3 or Art Clay 650.  Please note we only ever have one set of each of these unique glass shapes, no set are ever the same!

The glass is slightly different on each side so you can choose which side to use or make two way pieces. Some are even textured on one side.  The smallest leaf has a a beautiful sheen to it, which duplicates mother of pearl - this was difficult to capture on the photograph! 

Why not combine the glass shapes with our leaf cutters to create some fantastic designs.  Suitable for firing in a kiln with PMC3 or Art Clay 650. 

Depth 3.5mm set consists of 2 x large leaves 4.6cm length, 2.4cm width;1 x small leaf 3.6cm length, 1.7cm, 1 x extra small leaf lenght 2.4cm, width 1.4cm, 1 x rectangle 2.3cm length, 1.4cm width. 

GLASS DISCS

!
These hand cut discs are available to buy individually or seperate

No need to worry about trying to cut out perfect circles any longer, these perfectly round circular glass pieces are ideal to set with your PMC3 or Art Clay 650.  Buy individually or save and buy the set.  Again each piece is slightly different on each side and Disc A & B are textured on one side.  Diam 3.2mm depth 2.5mm

MELLOW YELLOW SET

!

Add a touch of sunshine with our set of 4 textured yellow glass discs for creating designs with PMC3 or Art Clay 650.

This set consists of 4 glass pieces 3.5mm thick; diam. circle (3.2cm), 2 x rectangle (2.5cm x 1.4cm), heart (2.4cm x 2.3cm widest points)

STARS N' HEARTS

!
A set of three individually cut glass shapes to create unique designs with metal clay.

Set consists of 3 x 3mm thick glass shapes.  Red heart; approximately 2.2mm to widest apart.1 x large heart 4cm to widest part, 1 small heart 2.3cm to widest part.

SPRING FRACTURE CABOCHON

!
This stunning glass cabochon combines fractures of spring green and deep pink glass combined with a dichroic centre for added sparkle.

Beautifully machine finished, this cabochon is 4mm thick, length 4.8cm and width 2.5cm.  Can be fired with in the kiln with PMC3 or Art Clay 650.

Like all our glass pieces there is only one of these cabochons in stock as they are not mass produced and each one is unique.