PMC Silver
!

PMC Original 20grm

!
Misubishi's original clay - PMC Original.
This clay shrinks by 25% and has to be kiln fired for 2 hours at 1650F/900C.  Easy to create with and stays more pliable for longer than PMC+ and PMC3.  Great for capturing large items in small detail and great for anyone who struggles to work on small objects.

PMC+

!
The second version of PMC to become available. Packs sizes are; 18grm, 28grm or 45grm.
PMC+ a strong, versatile clay which can be fired with a butane torch or by kiln.  Shrinkage rate 10—12%.  Kiln firing range 1650F to 1470F
A drier clay than PMC3 and good for carving.

PMC3

!

The latest version of PMC.  A soft and sticky clay available in various sizes; 9grm, 16grm, 25grm and 50grm.

PMC3 LUMP CLAY A very strong clay. Due its lower range of kiln temperatures a wider range of stones can be fired with PMC3.  Glass, ceramics, sterling and other metals can be fired safely with this clay.  Especially good for rings and pieces that require extra strength. Shrinkage rate 10-12%. Can be torch fired on kiln temperature range 1650°F to 1110°F  

PMC3 Syringe

!
PMC3 SYRINGE This product is a softened clay that comes in a ready to use syringe.  You can use syringe clay to make a strong attachment between clay elements.  It can also be used to fill in grooves or cracks or to produce lines or ropes of clay as decorative elements.  After opening, keep the uncapped syringe submerged in water.  It will remain fresh and ready to use as long as it is not allowed to dry out. Same shrinkage and firing temperatures as the PMC3 lump version.  Syringe tips also fit Art Clay syringes and vice versa

PMC3 Paste

!
pmcpaste3
15gm PMC3 PASTE Pre-mixed paste or slip.
It can be used to glue pieces of unfired clay together, fill joints or create textures on the surface of a piece.  Shrinkage rate and firing temperatures are the same as PMC3 lump version.